root/dan/perl/Object-with/branches/yappo/ppport.h @ 14553

Revision 14553, 29.1 kB (checked in by yappo, 5 years ago)

XS Object::witch yappo version

Line 
1
2/* ppport.h -- Perl/Pollution/Portability Version 2.011
3 *
4 * Automatically Created by Devel::PPPort on Mon Jun 23 18:02:46 2008
5 *
6 * Do NOT edit this file directly! -- Edit PPPort.pm instead.
7 *
8 * Version 2.x, Copyright (C) 2001, Paul Marquess.
9 * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
10 * This code may be used and distributed under the same license as any
11 * version of Perl.
12 *
13 * This version of ppport.h is designed to support operation with Perl
14 * installations back to 5.004, and has been tested up to 5.8.1.
15 *
16 * If this version of ppport.h is failing during the compilation of this
17 * module, please check if a newer version of Devel::PPPort is available
18 * on CPAN before sending a bug report.
19 *
20 * If you are using the latest version of Devel::PPPort and it is failing
21 * during compilation of this module, please send a report to perlbug@perl.com
22 *
23 * Include all following information:
24 *
25 *  1. The complete output from running "perl -V"
26 *
27 *  2. This file.
28 *
29 *  3. The name & version of the module you were trying to build.
30 *
31 *  4. A full log of the build that failed.
32 *
33 *  5. Any other information that you think could be relevant.
34 *
35 *
36 * For the latest version of this code, please retreive the Devel::PPPort
37 * module from CPAN.
38 *
39 */
40
41/*
42 * In order for a Perl extension module to be as portable as possible
43 * across differing versions of Perl itself, certain steps need to be taken.
44 * Including this header is the first major one, then using dTHR is all the
45 * appropriate places and using a PL_ prefix to refer to global Perl
46 * variables is the second.
47 *
48 */
49
50
51/* If you use one of a few functions that were not present in earlier
52 * versions of Perl, please add a define before the inclusion of ppport.h
53 * for a static include, or use the GLOBAL request in a single module to
54 * produce a global definition that can be referenced from the other
55 * modules.
56 *
57 * Function:            Static define:           Extern define:
58 * newCONSTSUB()        NEED_newCONSTSUB         NEED_newCONSTSUB_GLOBAL
59 *
60 */
61 
62
63/* To verify whether ppport.h is needed for your module, and whether any
64 * special defines should be used, ppport.h can be run through Perl to check
65 * your source code. Simply say:
66 *
67 *      perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
68 *
69 * The result will be a list of patches suggesting changes that should at
70 * least be acceptable, if not necessarily the most efficient solution, or a
71 * fix for all possible problems. It won't catch where dTHR is needed, and
72 * doesn't attempt to account for global macro or function definitions,
73 * nested includes, typemaps, etc.
74 *
75 * In order to test for the need of dTHR, please try your module under a
76 * recent version of Perl that has threading compiled-in.
77 *
78 */
79
80
81/*
82#!/usr/bin/perl
83@ARGV = ("*.xs") if !@ARGV;
84%badmacros = %funcs = %macros = (); $replace = 0;
85foreach (<DATA>) {
86        $funcs{$1} = 1 if /Provide:\s+(\S+)/;
87        $macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
88        $replace = $1 if /Replace:\s+(\d+)/;
89        $badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
90        $badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
91}
92foreach $filename (map(glob($_),@ARGV)) {
93        unless (open(IN, "<$filename")) {
94                warn "Unable to read from $file: $!\n";
95                next;
96        }
97        print "Scanning $filename...\n";
98        $c = ""; while (<IN>) { $c .= $_; } close(IN);
99        $need_include = 0; %add_func = (); $changes = 0;
100        $has_include = ($c =~ /#.*include.*ppport/m);
101
102        foreach $func (keys %funcs) {
103                if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
104                        if ($c !~ /\b$func\b/m) {
105                                print "If $func isn't needed, you don't need to request it.\n" if
106                                $changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
107                        } else {
108                                print "Uses $func\n";
109                                $need_include = 1;
110                        }
111                } else {
112                        if ($c =~ /\b$func\b/m) {
113                                $add_func{$func} =1 ;
114                                print "Uses $func\n";
115                                $need_include = 1;
116                        }
117                }
118        }
119
120        if (not $need_include) {
121                foreach $macro (keys %macros) {
122                        if ($c =~ /\b$macro\b/m) {
123                                print "Uses $macro\n";
124                                $need_include = 1;
125                        }
126                }
127        }
128
129        foreach $badmacro (keys %badmacros) {
130                if ($c =~ /\b$badmacro\b/m) {
131                        $changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
132                        print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
133                        $need_include = 1;
134                }
135        }
136       
137        if (scalar(keys %add_func) or $need_include != $has_include) {
138                if (!$has_include) {
139                        $inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
140                               "#include \"ppport.h\"\n";
141                        $c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
142                } elsif (keys %add_func) {
143                        $inc = join('',map("#define NEED_$_\n", sort keys %add_func));
144                        $c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
145                }
146                if (!$need_include) {
147                        print "Doesn't seem to need ppport.h.\n";
148                        $c =~ s/^.*#.*include.*ppport.*\n//m;
149                }
150                $changes++;
151        }
152       
153        if ($changes) {
154                open(OUT,">/tmp/ppport.h.$$");
155                print OUT $c;
156                close(OUT);
157                open(DIFF, "diff -u $filename /tmp/ppport.h.$$|");
158                while (<DIFF>) { s!/tmp/ppport\.h\.$$!$filename.patched!; print STDOUT; }
159                close(DIFF);
160                unlink("/tmp/ppport.h.$$");
161        } else {
162                print "Looks OK\n";
163        }
164}
165__DATA__
166*/
167
168#ifndef _P_P_PORTABILITY_H_
169#define _P_P_PORTABILITY_H_
170
171#ifndef PERL_REVISION
172#   ifndef __PATCHLEVEL_H_INCLUDED__
173#       define PERL_PATCHLEVEL_H_IMPLICIT
174#       include <patchlevel.h>
175#   endif
176#   if !(defined(PERL_VERSION) || (defined(SUBVERSION) && defined(PATCHLEVEL)))
177#       include <could_not_find_Perl_patchlevel.h>
178#   endif
179#   ifndef PERL_REVISION
180#       define PERL_REVISION    (5)
181        /* Replace: 1 */
182#       define PERL_VERSION     PATCHLEVEL
183#       define PERL_SUBVERSION  SUBVERSION
184        /* Replace PERL_PATCHLEVEL with PERL_VERSION */
185        /* Replace: 0 */
186#   endif
187#endif
188
189#define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
190
191/* It is very unlikely that anyone will try to use this with Perl 6
192   (or greater), but who knows.
193 */
194#if PERL_REVISION != 5
195#       error ppport.h only works with Perl version 5
196#endif /* PERL_REVISION != 5 */
197
198#ifndef ERRSV
199#       define ERRSV perl_get_sv("@",FALSE)
200#endif
201
202#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
203/* Replace: 1 */
204#       define PL_Sv            Sv
205#       define PL_compiling     compiling
206#       define PL_copline       copline
207#       define PL_curcop        curcop
208#       define PL_curstash      curstash
209#       define PL_defgv         defgv
210#       define PL_dirty         dirty
211#       define PL_dowarn        dowarn
212#       define PL_hints         hints
213#       define PL_na            na
214#       define PL_perldb        perldb
215#       define PL_rsfp_filters  rsfp_filters
216#       define PL_rsfpv         rsfp
217#       define PL_stdingv       stdingv
218#       define PL_sv_no         sv_no
219#       define PL_sv_undef      sv_undef
220#       define PL_sv_yes        sv_yes
221/* Replace: 0 */
222#endif
223
224#ifdef HASATTRIBUTE
225#  if (defined(__GNUC__) && defined(__cplusplus)) || defined(__INTEL_COMPILER)
226#    define PERL_UNUSED_DECL
227#  else
228#    define PERL_UNUSED_DECL __attribute__((unused))
229#  endif
230#else
231#  define PERL_UNUSED_DECL
232#endif
233
234#ifndef dNOOP
235#  define NOOP (void)0
236#  define dNOOP extern int Perl___notused PERL_UNUSED_DECL
237#endif
238
239#ifndef dTHR
240#  define dTHR          dNOOP
241#endif
242
243#ifndef dTHX
244#  define dTHX          dNOOP
245#  define dTHXa(x)      dNOOP
246#  define dTHXoa(x)     dNOOP
247#endif
248
249#ifndef pTHX
250#    define pTHX        void
251#    define pTHX_
252#    define aTHX
253#    define aTHX_
254#endif         
255
256#ifndef dAX
257#   define dAX I32 ax = MARK - PL_stack_base + 1
258#endif
259#ifndef dITEMS
260#   define dITEMS I32 items = SP - MARK
261#endif
262
263/* IV could also be a quad (say, a long long), but Perls
264 * capable of those should have IVSIZE already. */
265#if !defined(IVSIZE) && defined(LONGSIZE)
266#   define IVSIZE LONGSIZE
267#endif
268#ifndef IVSIZE
269#   define IVSIZE 4 /* A bold guess, but the best we can make. */
270#endif
271
272#ifndef UVSIZE
273#   define UVSIZE IVSIZE
274#endif
275
276#ifndef NVTYPE
277#   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
278#       define NVTYPE long double
279#   else
280#       define NVTYPE double
281#   endif
282typedef NVTYPE NV;
283#endif
284
285#ifndef INT2PTR
286
287#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
288#  define PTRV                  UV
289#  define INT2PTR(any,d)        (any)(d)
290#else
291#  if PTRSIZE == LONGSIZE
292#    define PTRV                unsigned long
293#  else
294#    define PTRV                unsigned
295#  endif
296#  define INT2PTR(any,d)        (any)(PTRV)(d)
297#endif
298#define NUM2PTR(any,d)  (any)(PTRV)(d)
299#define PTR2IV(p)       INT2PTR(IV,p)
300#define PTR2UV(p)       INT2PTR(UV,p)
301#define PTR2NV(p)       NUM2PTR(NV,p)
302#if PTRSIZE == LONGSIZE
303#  define PTR2ul(p)     (unsigned long)(p)
304#else
305#  define PTR2ul(p)     INT2PTR(unsigned long,p)       
306#endif
307
308#endif /* !INT2PTR */
309
310#ifndef boolSV
311#       define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
312#endif
313
314#ifndef gv_stashpvn
315#       define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
316#endif
317
318#ifndef newSVpvn
319#       define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
320#endif
321
322#ifndef newRV_inc
323/* Replace: 1 */
324#       define newRV_inc(sv) newRV(sv)
325/* Replace: 0 */
326#endif
327
328/* DEFSV appears first in 5.004_56 */
329#ifndef DEFSV
330#  define DEFSV GvSV(PL_defgv)
331#endif
332
333#ifndef SAVE_DEFSV
334#    define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
335#endif
336
337#ifndef newRV_noinc
338#  ifdef __GNUC__
339#    define newRV_noinc(sv)               \
340      ({                                  \
341          SV *nsv = (SV*)newRV(sv);       \
342          SvREFCNT_dec(sv);               \
343          nsv;                            \
344      })
345#  else
346#    if defined(USE_THREADS)
347static SV * newRV_noinc (SV * sv)
348{
349          SV *nsv = (SV*)newRV(sv);       
350          SvREFCNT_dec(sv);               
351          return nsv;                     
352}
353#    else
354#      define newRV_noinc(sv)    \
355        (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
356#    endif
357#  endif
358#endif
359
360/* Provide: newCONSTSUB */
361
362/* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
363#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
364
365#if defined(NEED_newCONSTSUB)
366static
367#else
368extern void newCONSTSUB(HV * stash, char * name, SV *sv);
369#endif
370
371#if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
372void
373newCONSTSUB(stash,name,sv)
374HV *stash;
375char *name;
376SV *sv;
377{
378        U32 oldhints = PL_hints;
379        HV *old_cop_stash = PL_curcop->cop_stash;
380        HV *old_curstash = PL_curstash;
381        line_t oldline = PL_curcop->cop_line;
382        PL_curcop->cop_line = PL_copline;
383
384        PL_hints &= ~HINT_BLOCK_SCOPE;
385        if (stash)
386                PL_curstash = PL_curcop->cop_stash = stash;
387
388        newSUB(
389
390#if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
391     /* before 5.003_22 */
392                start_subparse(),
393#else
394#  if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
395     /* 5.003_22 */
396                start_subparse(0),
397#  else
398     /* 5.003_23  onwards */
399                start_subparse(FALSE, 0),
400#  endif
401#endif
402
403                newSVOP(OP_CONST, 0, newSVpv(name,0)),
404                newSVOP(OP_CONST, 0, &PL_sv_no),   /* SvPV(&PL_sv_no) == "" -- GMB */
405                newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
406        );
407
408        PL_hints = oldhints;
409        PL_curcop->cop_stash = old_cop_stash;
410        PL_curstash = old_curstash;
411        PL_curcop->cop_line = oldline;
412}
413#endif
414
415#endif /* newCONSTSUB */
416
417#ifndef START_MY_CXT
418
419/*
420 * Boilerplate macros for initializing and accessing interpreter-local
421 * data from C.  All statics in extensions should be reworked to use
422 * this, if you want to make the extension thread-safe.  See ext/re/re.xs
423 * for an example of the use of these macros.
424 *
425 * Code that uses these macros is responsible for the following:
426 * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
427 * 2. Declare a typedef named my_cxt_t that is a structure that contains
428 *    all the data that needs to be interpreter-local.
429 * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
430 * 4. Use the MY_CXT_INIT macro such that it is called exactly once
431 *    (typically put in the BOOT: section).
432 * 5. Use the members of the my_cxt_t structure everywhere as
433 *    MY_CXT.member.
434 * 6. Use the dMY_CXT macro (a declaration) in all the functions that
435 *    access MY_CXT.
436 */
437
438#if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
439    defined(PERL_CAPI)    || defined(PERL_IMPLICIT_CONTEXT)
440
441/* This must appear in all extensions that define a my_cxt_t structure,
442 * right after the definition (i.e. at file scope).  The non-threads
443 * case below uses it to declare the data as static. */
444#define START_MY_CXT
445
446#if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
447/* Fetches the SV that keeps the per-interpreter data. */
448#define dMY_CXT_SV \
449        SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
450#else /* >= perl5.004_68 */
451#define dMY_CXT_SV \
452        SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY,             \
453                                  sizeof(MY_CXT_KEY)-1, TRUE)
454#endif /* < perl5.004_68 */
455
456/* This declaration should be used within all functions that use the
457 * interpreter-local data. */
458#define dMY_CXT \
459        dMY_CXT_SV;                                                     \
460        my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
461
462/* Creates and zeroes the per-interpreter data.
463 * (We allocate my_cxtp in a Perl SV so that it will be released when
464 * the interpreter goes away.) */
465#define MY_CXT_INIT \
466        dMY_CXT_SV;                                                     \
467        /* newSV() allocates one more than needed */                    \
468        my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
469        Zero(my_cxtp, 1, my_cxt_t);                                     \
470        sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
471
472/* This macro must be used to access members of the my_cxt_t structure.
473 * e.g. MYCXT.some_data */
474#define MY_CXT          (*my_cxtp)
475
476/* Judicious use of these macros can reduce the number of times dMY_CXT
477 * is used.  Use is similar to pTHX, aTHX etc. */
478#define pMY_CXT         my_cxt_t *my_cxtp
479#define pMY_CXT_        pMY_CXT,
480#define _pMY_CXT        ,pMY_CXT
481#define aMY_CXT         my_cxtp
482#define aMY_CXT_        aMY_CXT,
483#define _aMY_CXT        ,aMY_CXT
484
485#else /* single interpreter */
486
487#define START_MY_CXT    static my_cxt_t my_cxt;
488#define dMY_CXT_SV      dNOOP
489#define dMY_CXT         dNOOP
490#define MY_CXT_INIT     NOOP
491#define MY_CXT          my_cxt
492
493#define pMY_CXT         void
494#define pMY_CXT_
495#define _pMY_CXT
496#define aMY_CXT
497#define aMY_CXT_
498#define _aMY_CXT
499
500#endif
501
502#endif /* START_MY_CXT */
503
504#ifndef IVdf
505#  if IVSIZE == LONGSIZE
506#       define  IVdf            "ld"
507#       define  UVuf            "lu"
508#       define  UVof            "lo"
509#       define  UVxf            "lx"
510#       define  UVXf            "lX"
511#   else
512#       if IVSIZE == INTSIZE
513#           define      IVdf    "d"
514#           define      UVuf    "u"
515#           define      UVof    "o"
516#           define      UVxf    "x"
517#           define      UVXf    "X"
518#       endif
519#   endif
520#endif
521
522#ifndef NVef
523#   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
524        defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */
525#       define NVef             PERL_PRIeldbl
526#       define NVff             PERL_PRIfldbl
527#       define NVgf             PERL_PRIgldbl
528#   else
529#       define NVef             "e"
530#       define NVff             "f"
531#       define NVgf             "g"
532#   endif
533#endif
534
535#ifndef AvFILLp                 /* Older perls (<=5.003) lack AvFILLp */
536#   define AvFILLp AvFILL
537#endif
538
539#ifdef SvPVbyte
540#   if PERL_REVISION == 5 && PERL_VERSION < 7
541       /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
542#       undef SvPVbyte
543#       define SvPVbyte(sv, lp) \
544          ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
545           ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
546       static char *
547       my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
548       {   
549           sv_utf8_downgrade(sv,0);
550           return SvPV(sv,*lp);
551       }
552#   endif
553#else
554#   define SvPVbyte SvPV
555#endif
556
557#ifndef SvPV_nolen
558#   define SvPV_nolen(sv) \
559        ((SvFLAGS(sv) & (SVf_POK)) == SVf_POK \
560         ? SvPVX(sv) : sv_2pv_nolen(sv))
561    static char *
562    sv_2pv_nolen(pTHX_ register SV *sv)
563    {   
564        STRLEN n_a;
565        return sv_2pv(sv, &n_a);
566    }
567#endif
568
569#ifndef get_cv
570#   define get_cv(name,create) perl_get_cv(name,create)
571#endif
572
573#ifndef get_sv
574#   define get_sv(name,create) perl_get_sv(name,create)
575#endif
576
577#ifndef get_av
578#   define get_av(name,create) perl_get_av(name,create)
579#endif
580
581#ifndef get_hv
582#   define get_hv(name,create) perl_get_hv(name,create)
583#endif
584
585#ifndef call_argv
586#   define call_argv perl_call_argv
587#endif
588
589#ifndef call_method
590#   define call_method perl_call_method
591#endif
592
593#ifndef call_pv
594#   define call_pv perl_call_pv
595#endif
596
597#ifndef call_sv
598#   define call_sv perl_call_sv
599#endif
600
601#ifndef eval_pv
602#   define eval_pv perl_eval_pv
603#endif
604
605#ifndef eval_sv
606#   define eval_sv perl_eval_sv
607#endif
608
609#ifndef PERL_SCAN_GREATER_THAN_UV_MAX
610#   define PERL_SCAN_GREATER_THAN_UV_MAX 0x02
611#endif
612
613#ifndef PERL_SCAN_SILENT_ILLDIGIT
614#   define PERL_SCAN_SILENT_ILLDIGIT 0x04
615#endif
616
617#ifndef PERL_SCAN_ALLOW_UNDERSCORES
618#   define PERL_SCAN_ALLOW_UNDERSCORES 0x01
619#endif
620
621#ifndef PERL_SCAN_DISALLOW_PREFIX
622#   define PERL_SCAN_DISALLOW_PREFIX 0x02
623#endif
624
625#if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
626#define I32_CAST
627#else
628#define I32_CAST (I32*)
629#endif
630
631#ifndef grok_hex
632static UV _grok_hex (char *string, STRLEN *len, I32 *flags, NV *result) {
633    NV r = scan_hex(string, *len, I32_CAST len);
634    if (r > UV_MAX) {
635        *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
636        if (result) *result = r;
637        return UV_MAX;
638    }
639    return (UV)r;
640}
641       
642#   define grok_hex(string, len, flags, result)     \
643        _grok_hex((string), (len), (flags), (result))
644#endif
645
646#ifndef grok_oct
647static UV _grok_oct (char *string, STRLEN *len, I32 *flags, NV *result) {
648    NV r = scan_oct(string, *len, I32_CAST len);
649    if (r > UV_MAX) {
650        *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
651        if (result) *result = r;
652        return UV_MAX;
653    }
654    return (UV)r;
655}
656
657#   define grok_oct(string, len, flags, result)     \
658        _grok_oct((string), (len), (flags), (result))
659#endif
660
661#if !defined(grok_bin) && defined(scan_bin)
662static UV _grok_bin (char *string, STRLEN *len, I32 *flags, NV *result) {
663    NV r = scan_bin(string, *len, I32_CAST len);
664    if (r > UV_MAX) {
665        *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
666        if (result) *result = r;
667        return UV_MAX;
668    }
669    return (UV)r;
670}
671
672#   define grok_bin(string, len, flags, result)     \
673        _grok_bin((string), (len), (flags), (result))
674#endif
675
676#ifndef IN_LOCALE
677#   define IN_LOCALE \
678        (PL_curcop == &PL_compiling ? IN_LOCALE_COMPILETIME : IN_LOCALE_RUNTIME)
679#endif
680
681#ifndef IN_LOCALE_RUNTIME
682#   define IN_LOCALE_RUNTIME   (PL_curcop->op_private & HINT_LOCALE)
683#endif
684
685#ifndef IN_LOCALE_COMPILETIME
686#   define IN_LOCALE_COMPILETIME   (PL_hints & HINT_LOCALE)
687#endif
688
689
690#ifndef IS_NUMBER_IN_UV
691#   define IS_NUMBER_IN_UV                          0x01   
692#   define IS_NUMBER_GREATER_THAN_UV_MAX    0x02
693#   define IS_NUMBER_NOT_INT                0x04
694#   define IS_NUMBER_NEG                            0x08
695#   define IS_NUMBER_INFINITY               0x10
696#   define IS_NUMBER_NAN                    0x20 
697#endif
698   
699#ifndef grok_numeric_radix
700#   define GROK_NUMERIC_RADIX(sp, send) grok_numeric_radix(aTHX_ sp, send)
701
702#define grok_numeric_radix Perl_grok_numeric_radix
703   
704bool
705Perl_grok_numeric_radix(pTHX_ const char **sp, const char *send)
706{
707#ifdef USE_LOCALE_NUMERIC
708#if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
709    if (PL_numeric_radix_sv && IN_LOCALE) {
710        STRLEN len;
711        char* radix = SvPV(PL_numeric_radix_sv, len);
712        if (*sp + len <= send && memEQ(*sp, radix, len)) {
713            *sp += len;
714            return TRUE;
715        }
716    }
717#else
718    /* pre5.6.0 perls don't have PL_numeric_radix_sv so the radix
719     * must manually be requested from locale.h */
720#include <locale.h>
721    struct lconv *lc = localeconv();
722    char *radix = lc->decimal_point;
723    if (radix && IN_LOCALE) {
724        STRLEN len = strlen(radix);
725        if (*sp + len <= send && memEQ(*sp, radix, len)) {
726            *sp += len;
727            return TRUE;
728        }
729    }
730#endif /* PERL_VERSION */
731#endif /* USE_LOCALE_NUMERIC */
732    /* always try "." if numeric radix didn't match because
733     * we may have data from different locales mixed */
734    if (*sp < send && **sp == '.') {
735        ++*sp;
736        return TRUE;
737    }
738    return FALSE;
739}
740#endif /* grok_numeric_radix */
741
742#ifndef grok_number
743
744#define grok_number Perl_grok_number
745
746int
747Perl_grok_number(pTHX_ const char *pv, STRLEN len, UV *valuep)
748{
749  const char *s = pv;
750  const char *send = pv + len;
751  const UV max_div_10 = UV_MAX / 10;
752  const char max_mod_10 = UV_MAX % 10;
753  int numtype = 0;
754  int sawinf = 0;
755  int sawnan = 0;
756
757  while (s < send && isSPACE(*s))
758    s++;
759  if (s == send) {
760    return 0;
761  } else if (*s == '-') {
762    s++;
763    numtype = IS_NUMBER_NEG;
764  }
765  else if (*s == '+')
766  s++;
767
768  if (s == send)
769    return 0;
770
771  /* next must be digit or the radix separator or beginning of infinity */
772  if (isDIGIT(*s)) {
773    /* UVs are at least 32 bits, so the first 9 decimal digits cannot
774       overflow.  */
775    UV value = *s - '0';
776    /* This construction seems to be more optimiser friendly.
777       (without it gcc does the isDIGIT test and the *s - '0' separately)
778       With it gcc on arm is managing 6 instructions (6 cycles) per digit.
779       In theory the optimiser could deduce how far to unroll the loop
780       before checking for overflow.  */
781    if (++s < send) {
782      int digit = *s - '0';
783      if (digit >= 0 && digit <= 9) {
784        value = value * 10 + digit;
785        if (++s < send) {
786          digit = *s - '0';
787          if (digit >= 0 && digit <= 9) {
788            value = value * 10 + digit;
789            if (++s < send) {
790              digit = *s - '0';
791              if (digit >= 0 && digit <= 9) {
792                value = value * 10 + digit;
793                        if (++s < send) {
794                  digit = *s - '0';
795                  if (digit >= 0 && digit <= 9) {
796                    value = value * 10 + digit;
797                    if (++s < send) {
798                      digit = *s - '0';
799                      if (digit >= 0 && digit <= 9) {
800                        value = value * 10 + digit;
801                        if (++s < send) {
802                          digit = *s - '0';
803                          if (digit >= 0 && digit <= 9) {
804                            value = value * 10 + digit;
805                            if (++s < send) {
806                              digit = *s - '0';
807                              if (digit >= 0 && digit <= 9) {
808                                value = value * 10 + digit;
809                                if (++s < send) {
810                                  digit = *s - '0';
811                                  if (digit >= 0 && digit <= 9) {
812                                    value = value * 10 + digit;
813                                    if (++s < send) {
814                                      /* Now got 9 digits, so need to check
815                                         each time for overflow.  */
816                                      digit = *s - '0';
817                                      while (digit >= 0 && digit <= 9
818                                             && (value < max_div_10
819                                                 || (value == max_div_10
820                                                     && digit <= max_mod_10))) {
821                                        value = value * 10 + digit;
822                                        if (++s < send)
823                                          digit = *s - '0';
824                                        else
825                                          break;
826                                      }
827                                      if (digit >= 0 && digit <= 9
828                                          && (s < send)) {
829                                        /* value overflowed.
830                                           skip the remaining digits, don't
831                                           worry about setting *valuep.  */
832                                        do {
833                                          s++;
834                                        } while (s < send && isDIGIT(*s));
835                                        numtype |=
836                                          IS_NUMBER_GREATER_THAN_UV_MAX;
837                                        goto skip_value;
838                                      }
839                                    }
840                                  }
841                                                }
842                              }
843                            }
844                          }
845                        }
846                      }
847                    }
848                  }
849                }
850              }
851            }
852          }
853            }
854      }
855    }
856    numtype |= IS_NUMBER_IN_UV;
857    if (valuep)
858      *valuep = value;
859
860  skip_value:
861    if (GROK_NUMERIC_RADIX(&s, send)) {
862      numtype |= IS_NUMBER_NOT_INT;
863      while (s < send && isDIGIT(*s))  /* optional digits after the radix */
864        s++;
865    }
866  }
867  else if (GROK_NUMERIC_RADIX(&s, send)) {
868    numtype |= IS_NUMBER_NOT_INT | IS_NUMBER_IN_UV; /* valuep assigned below */
869    /* no digits before the radix means we need digits after it */
870    if (s < send && isDIGIT(*s)) {
871      do {
872        s++;
873      } while (s < send && isDIGIT(*s));
874      if (valuep) {
875        /* integer approximation is valid - it's 0.  */
876        *valuep = 0;
877      }
878    }
879    else
880      return 0;
881  } else if (*s == 'I' || *s == 'i') {
882    s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
883    s++; if (s == send || (*s != 'F' && *s != 'f')) return 0;
884    s++; if (s < send && (*s == 'I' || *s == 'i')) {
885      s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
886      s++; if (s == send || (*s != 'I' && *s != 'i')) return 0;
887      s++; if (s == send || (*s != 'T' && *s != 't')) return 0;
888      s++; if (s == send || (*s != 'Y' && *s != 'y')) return 0;
889      s++;
890    }
891    sawinf = 1;
892  } else if (*s == 'N' || *s == 'n') {
893    /* XXX TODO: There are signaling NaNs and quiet NaNs. */
894    s++; if (s == send || (*s != 'A' && *s != 'a')) return 0;
895    s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
896    s++;
897    sawnan = 1;
898  } else
899    return 0;
900
901  if (sawinf) {
902    numtype &= IS_NUMBER_NEG; /* Keep track of sign  */
903    numtype |= IS_NUMBER_INFINITY | IS_NUMBER_NOT_INT;
904  } else if (sawnan) {
905    numtype &= IS_NUMBER_NEG; /* Keep track of sign  */
906    numtype |= IS_NUMBER_NAN | IS_NUMBER_NOT_INT;
907  } else if (s < send) {
908    /* we can have an optional exponent part */
909    if (*s == 'e' || *s == 'E') {
910      /* The only flag we keep is sign.  Blow away any "it's UV"  */
911      numtype &= IS_NUMBER_NEG;
912      numtype |= IS_NUMBER_NOT_INT;
913      s++;
914      if (s < send && (*s == '-' || *s == '+'))
915        s++;
916      if (s < send && isDIGIT(*s)) {
917        do {
918          s++;
919        } while (s < send && isDIGIT(*s));
920      }
921      else
922      return 0;
923    }
924  }
925  while (s < send && isSPACE(*s))
926    s++;
927  if (s >= send)
928    return numtype;
929  if (len == 10 && memEQ(pv, "0 but true", 10)) {
930    if (valuep)
931      *valuep = 0;
932    return IS_NUMBER_IN_UV;
933  }
934  return 0;
935}
936#endif /* grok_number */
937
938#ifndef PERL_MAGIC_sv
939#   define PERL_MAGIC_sv             '\0'
940#endif
941
942#ifndef PERL_MAGIC_overload
943#   define PERL_MAGIC_overload       'A'
944#endif
945
946#ifndef PERL_MAGIC_overload_elem
947#   define PERL_MAGIC_overload_elem  'a'
948#endif
949
950#ifndef PERL_MAGIC_overload_table
951#   define PERL_MAGIC_overload_table 'c'
952#endif
953
954#ifndef PERL_MAGIC_bm
955#   define PERL_MAGIC_bm             'B'
956#endif
957
958#ifndef PERL_MAGIC_regdata
959#   define PERL_MAGIC_regdata        'D'
960#endif
961
962#ifndef PERL_MAGIC_regdatum
963#   define PERL_MAGIC_regdatum       'd'
964#endif
965
966#ifndef PERL_MAGIC_env
967#   define PERL_MAGIC_env            'E'
968#endif
969
970#ifndef PERL_MAGIC_envelem
971#   define PERL_MAGIC_envelem        'e'
972#endif
973
974#ifndef PERL_MAGIC_fm
975#   define PERL_MAGIC_fm             'f'
976#endif
977
978#ifndef PERL_MAGIC_regex_global
979#   define PERL_MAGIC_regex_global   'g'
980#endif
981
982#ifndef PERL_MAGIC_isa
983#   define PERL_MAGIC_isa            'I'
984#endif
985
986#ifndef PERL_MAGIC_isaelem
987#   define PERL_MAGIC_isaelem        'i'
988#endif
989
990#ifndef PERL_MAGIC_nkeys
991#   define PERL_MAGIC_nkeys          'k'
992#endif
993
994#ifndef PERL_MAGIC_dbfile
995#   define PERL_MAGIC_dbfile         'L'
996#endif
997
998#ifndef PERL_MAGIC_dbline
999#   define PERL_MAGIC_dbline         'l'
1000#endif
1001
1002#ifndef PERL_MAGIC_mutex
1003#   define PERL_MAGIC_mutex          'm'
1004#endif
1005
1006#ifndef PERL_MAGIC_shared
1007#   define PERL_MAGIC_shared         'N'
1008#endif
1009
1010#ifndef PERL_MAGIC_shared_scalar
1011#   define PERL_MAGIC_shared_scalar  'n'
1012#endif
1013
1014#ifndef PERL_MAGIC_collxfrm
1015#   define PERL_MAGIC_collxfrm       'o'
1016#endif
1017
1018#ifndef PERL_MAGIC_tied
1019#   define PERL_MAGIC_tied           'P'
1020#endif
1021
1022#ifndef PERL_MAGIC_tiedelem
1023#   define PERL_MAGIC_tiedelem       'p'
1024#endif
1025
1026#ifndef PERL_MAGIC_tiedscalar
1027#   define PERL_MAGIC_tiedscalar     'q'
1028#endif
1029
1030#ifndef PERL_MAGIC_qr
1031#   define PERL_MAGIC_qr             'r'
1032#endif
1033
1034#ifndef PERL_MAGIC_sig
1035#   define PERL_MAGIC_sig            'S'
1036#endif
1037
1038#ifndef PERL_MAGIC_sigelem
1039#   define PERL_MAGIC_sigelem        's'
1040#endif
1041
1042#ifndef PERL_MAGIC_taint
1043#   define PERL_MAGIC_taint          't'
1044#endif
1045
1046#ifndef PERL_MAGIC_uvar
1047#   define PERL_MAGIC_uvar           'U'
1048#endif
1049
1050#ifndef PERL_MAGIC_uvar_elem
1051#   define PERL_MAGIC_uvar_elem      'u'
1052#endif
1053
1054#ifndef PERL_MAGIC_vstring
1055#   define PERL_MAGIC_vstring        'V'
1056#endif
1057
1058#ifndef PERL_MAGIC_vec
1059#   define PERL_MAGIC_vec            'v'
1060#endif
1061
1062#ifndef PERL_MAGIC_utf8
1063#   define PERL_MAGIC_utf8           'w'
1064#endif
1065
1066#ifndef PERL_MAGIC_substr
1067#   define PERL_MAGIC_substr         'x'
1068#endif
1069
1070#ifndef PERL_MAGIC_defelem
1071#   define PERL_MAGIC_defelem        'y'
1072#endif
1073
1074#ifndef PERL_MAGIC_glob
1075#   define PERL_MAGIC_glob           '*'
1076#endif
1077
1078#ifndef PERL_MAGIC_arylen
1079#   define PERL_MAGIC_arylen         '#'
1080#endif
1081
1082#ifndef PERL_MAGIC_pos
1083#   define PERL_MAGIC_pos            '.'
1084#endif
1085
1086#ifndef PERL_MAGIC_backref
1087#   define PERL_MAGIC_backref        '<'
1088#endif
1089
1090#ifndef PERL_MAGIC_ext
1091#   define PERL_MAGIC_ext            '~'
1092#endif
1093
1094#endif /* _P_P_PORTABILITY_H_ */
1095
1096/* End of File ppport.h */
Note: See TracBrowser for help on using the browser.